- BACK Page 1 Page 2 Page 3 Page 4 Page 5
- After dry fit and welding on some flanges, a coat of manifold spray makes it look all tidy if nothing
- else ;-)
- Now I can turn my attention to the job I wanted to do in the first place, replace the cats with bolt in
- straight through stainless pipe, which allow me to re-install the cats for mot emissions testing.
- Point of no return after couple minutes with hacksaw ( favourite weapon being 9" disc cutter
- not deployed this time around as I need a controlled cut because there is not much room for
- error.)
The cats actually look in very good condition........i think, by comparison they are quite alot
bigger than std C30SE ones.
Installation of flanges next.
